Controller Functionality
64
AYC-x6355 (Rev. B) Installation and User Manual
7.9.18
Relay Code Assignment using Search Method
To assign relay code using the Search method:
1.
Enter Programming mode.
2.
Press
9
to enter Menu 9.
The left LED turns green and the right LED
turns orange.
3.
Enter
000
for user slot access.
The right LED flashes orange.
The controller is now waiting for the primary code of the user.
4.
Perform one of the following:
Enter the 4- to 8-digit PIN code of the
Primary code belonging to the user you
want to delete.
Present the user card of the Primary code belonging to the
user you want to delete.
The left LED flashes green.
5.
Enter the assignment digit for the current user slot:
1
activates the Lock Strike relay only default
2
activates the Auxiliary relay only
3
activates the Lock Strike and Auxiliary relays
If the assignment digit is valid, three beeps are heard and the
controller returns to Normal mode.
If the assignment digit is invalid, a long beep sounds and the
controller waits for another assignment digit to be entered.
Green
Green Orange
9
Green
Orange
Green
Orange