Reader Functionality
AYC-x6355 (Rev. B) Installation and User Manual
35
You hear three beeps.
The system returns to Standby mode.
6.2.8
Setting the Backlight Behavior
To set the backlight behavior:
1.
Enter Programming mode.
2.
Press
6
to enter Menu 6.
The Transmit LED turns red.
3.
Enter one of the following codes:
0
for always off
1
for always on
2
for 10 sec. backlight after a key is pressed otherwise off
3
for 10 sec. backlight after a key is pressed otherwise
dimmed
You hear three beeps.
The system returns to Standby mode.
6.2.9
Return to Factory Default Settings
You must be very careful before using this command! This
erases the entire memory and return all codes to their factory
default setting.
To return to factory default settings:
1.
Enter Programming mode.
2.
Press
0
to enter Menu 0.
Both LEDs flash red.
3.
Enter your 4-digit Programming code.
Red
Green
Red Green
Red
Green
Red
Red