Controller Functionality
AYC-Qx4 family manual
Page 58
06 - Returns to factory defaults and sets a 6 digit code.
08 - Returns to factory defaults and sets a 4-8 digit code.
Note:
When choosing the 4-8 option, please note that you should
either enter zeros before the code, or press pound at the end
(for example if your code is 12345, enter either 00012345 or
12345#).
•
Both the Mode and
Door LEDs will flash red.
3)
Enter your 4-8 digits Programming
Code.
•
If the Programming Code is valid, all memory will be
erased. You will hear three beeps and the controller will
return to Normal Mode.
•
If the Programming Code is invalid you will hear a long
beep and the controller will return to Normal Mode
without erasing the memory contents.
Replacing a Lost Programming Code
Note:
•
The AYC-Qx4 must be in Normal mode, otherwise this will not
work. Make sure that the Mode LED is green before
proceeding.
1)
Remove power from the Power Supply Unit.
2)
Press the REX Button on the Power Supply Unit.
3)
Apply power to the unit with REX button pressed.
4)
Release the REX Button.
5)
You now have 15 seconds to program a new Programming
code into the Access Control unit using the default code
?
?
? ?
Mode/Transmit
Door/Program
Red
Red
Summary of Contents for AYC-Q Series
Page 2: ......
