![Rosslare AY-Q64 Installation And Programming Manual Download Page 12](http://html.mh-extra.com/html/rosslare/ay-q64/ay-q64_installation-and-programming-manual_1489285012.webp)
Installation
12
AY-Q64 Installation and Programming Manual
4.2
Wiring the AY-Q64
The reader is supplied with a 16-inch pigtail, having a 6-conductor
cable.
To connect the reader to the controller:
1.
Prepare the reader cable by cutting the cable jacket back 1¼
inches and strip the wire ½ inch. Prepare the controller cable by
cutting the cable jacket back 1¼ inches and strip the wire ½ inch.
2.
Splice the reader pigtail wires to the corresponding controller
wires and cover each connection (see Table 1).
Table 1: Wire Color Guide
Color
Description
Red
VDC
Black
Ground
White
Data 1/Clock
Green
Data 0/Data
Brown
LED control
Purple
Tamper
3.
If the tamper output is being utilized, connect the purple wire to
the correct input on the controller.
4.
Trim and cover all conductors that are not used.