Introduction
8
AY-Q6x60 Series Installation and Programming Manual
1.
Introduction
The AY-Q6260 and AY-Q6360 are metallic, anti-vandal, MIFARE
®
contactless smart card sector readers used in access control
system solutions.
The readers scan information from a MIFARE smart card, which is
stored in a specific and protected sector, and send the data on to a
connected access control system.
The system reads MIFARE 1K and MIFARE 4K card sector data, as
well as the unique ID number of the following cards: MIFARE 1K,
MIFARE 4K, MIFARE
Ultralight, and MIFARE DESFire. The readers
transmit the identification numbers they receive to an access
control system.
The readers can also check the validity of cards before scanning
them. When checking, readers only send card information to the
access control system from cards with the correct security pass-
code. The readers are suitable for both indoor and outdoor
installations.
Reader setup and operation is controlled using a configuration card
to adjust settings directly, without having to connect a remote
computer or remove the unit. The configuration card is a regular
MIFARE 1K card, which can be pre-programmed using Rosslare’s
CP-R25 (or CP-R26) desktop MIFARE programmer, together with its
associated software the AS-B01.
The AY-Q6260 and AY-Q6360 readers are compatible with almost
all access controllers, including Rosslare's AC-115, AC-215, and
AC-225 controllers.