Installation
12
AY-Q6x60 Series Installation and Programming Manual
2.
Prepare the controller cable by cutting the cable jacket back 3.2
cm (1¼”) and stripping the wire 1.3 cm (½”).
3.
Splice the reader’s pigtail wires to the corresponding controller
wires and cover each joint with insulating tape.
4.
Trim and cover all unused conductors.
To shield the cable from external interference, attach it to one
of the following:
•
The same earth ground as the access control system
•
The signal ground connection at the panel
•
The power supply end of the cable