Programming the AC-C31V
AC-C31V Installation Manual
Page 27
that the controller is now waiting for
the Primary Code of the user that you
want to delete.
4. Enter the 4-digit PIN Code of the Primary
Code belonging to the user that you
want to delete.
The Mode LED flashes red. Enter programming code to
confirm.
o
If the Programming Code is valid, three beeps are
emitted, and the AC-C31V returns to Normal Mode.
o
If the Programming Code is invalid, a long beep is
emitted, and the AC-C31V returns to Normal Mode.
Note:
It is recommended that a record be kept of added and
deleted users, so that it is easier to keep track of which user
slots are empty and which user slots are not.
12.11
Return to Factory Default Settings
WARNING!!! Be very careful before using this command as it will
erase the entire memory, including all User and Special Codes,
and will return all codes to their factory default settings.
1. Enter Programming Mode.
2. Press "0" to enter Menu 0.
The Mode LED and the Door LED
flash red.
3. Enter your 4-digit Programming
Code. If the Programming Code is valid,
all memory is erased, three beeps are
emitted, and the controller returns to
Normal Mode.
o
If the Programming Code is invalid, a long beep is
emitted, and the controller returns to Normal Mode
without erasing the memory of the controller.
