Ross Ultrix 2101DR-008-11, Manual, Page: 55 / 56

Ultrix SFP Modules Guide (v11.0) SFP-MADI-1300MM • 55
SFP-MADI-1300MM
The SFP-MADI-1300MM is a small form-factor pluggable LC transceiver for use with 50/125 and 60/125
multi-mode fiber. The SFP-MADI-1300MM will provide a 1300 nanometer MADI interface to Ross Ultrix routing
systems.
Features
• Industry SFP package
• LC duplex connector interface
• Suitable for AES10 transmission and receiving
• Operates with 50/125µm and 60/125µm multi-mode fiber
• Hot-pluggable
Simplified Block Diagram
Figure 14.1 High Level Block Diagram
Technical Specifications
Note that specifications are subject to change without notice.
Absolute Maximum Ratings
Exceeding any of these ratings may permanently damage the module. Exposure to absolute maximum rating
conditions for extended periods may affect device reliability.
Recommended Operating Conditions
All the data in this specification refers to the operating conditions above and over lifetime unless otherwise stated.
Table 14.1 Absolute Maximum Ratings
Parameter Min. Max. Notes
Supply Voltage -0.5V 3.63V
Storage Temperature -40°C +100°C
Table 14.2 Recommended Operating Conditions
Parameter Min. Max. Notes
Supply Voltage 3.0V 3.6V
Case Operating Temperature -40°C +85°C
OPTICAL
MODULE
FIBER IN
(1270-1380nm)
FIBER OUT
(1270-1380nm)
AUX
IN
AUX
OUT