Ross Ultrix 2101DR-008-11, Manual, Page: 35 / 56

Ultrix SFP Modules Guide (v11.0) SFP-FIBER-3G,SFP-MADI-1310SM • 35
SFP-FIBER-3G,SFP-MADI-1310SM
The SFP-FIBER-3G is an optical transceiver module engineered for exceptional performance in the presence of
SDI pathological patterns. The transceiver features best-in-class optical receiver sensitivity for SMPTE 259M,
SMPTE 344M, SMPTE 292M and SMPTE 424M serial rates, thus providing superior optical link budget and
robustness.
The SFP-FIBER-3G contains a PIN photo diode receiver and a 1310nm Fabry-Pérot laser transmitter designed to
provide error-free transmission of signals from 50Mbps to 3Gbps over single mode fiber (9/125). It is also
hot-pluggable.
The SFP-MADI-1310SM includes the same features as the SFP-FIBER-3G, but also transmits and receives MADI
signals.
Features
• SMPTE 297-2006 compatible
• Best-in-class optical receiver sensitivity: -22dBm (over all supported video rates with pathological data)
• Robust error free transmission of signals from 50Mbps to 3Gbps with up to 30km single-mode fiber
• Supports video pathological patterns for SD-SDI, HD-SDI and 3G-SDI
• Hot-pluggable
• Laser disable pin
• 3.3V power supply
• Operating temperature range: -25°C to 85°C
• SFP package size: 56.5mm x 13.4mm x 8.6mm
Simplified Block Diagram
Figure 9.1 SFP-FIBER-3G, SFP-MADI-1310SM — High Level Block Diagram
Technical Specifications
Note that specifications are subject to change without notice.
Absolute Maximum Ratings
Exceeding any of these ratings may permanently damage the module. Exposure to absolute maximum rating
conditions for extended periods may affect device reliability.
Table 9.1 Absolute Maximum Ratings
Parameter Value
Supply Voltage 4V
Operating Case Temperature -25°C to 85°C
OPTICAL
MODULE
FIBER IN
(780-880nm)
FIBER OUT
(850nm)
AUX
IN
AUX
OUT