24 • Configuration
Ultripower User Guide (v4.0)
For More Information on...
• the physical
PSU OUT
port locations, refer to the section “
To assign a PSU OUT port to a device
1. Display the Ultripower interface in DashBoard as outlined in the procedure “
2. Select the
Setup
tab.
3. User the
Device Labels
fields to assign a unique identifier for up to four devices.
Ultripower does not support Unicode characters.
This label is used in the Connected Device menus to identify each external device connected to the Ultripower.
4. Use the
Connected Device
menu to assign a device label to a physical Output Port on the Ultripower chassis.
Some external devices require multiple ports (e.g. ULTRIX-FR5 requires four ports). Refer to the user guide for
your external device to confirm the number of required connections to the Ultripower.
5. Click
Apply
in the
Connected Device
area.
Enabling Power to an External Device
Once the
PSU OUT
ports are assigned to external devices, you can enable power to those devices using the options
in the Control tab.
To enable power to an external device
1. Locate the Ultripower in the Tree View of DashBoard.
2. Expand the Ultripower node.
3. Double-click the Ultripower sub-node.
4. Select the
Control
tab.
The current power state is reported for each defined device.
5. Select the
Power
box for the device you wish to enable power for.
6. Click
Change
below the box you selected in step 5.
The
Confirm
dialog opens.
Summary of Contents for Ultripower
Page 1: ...Ultripower User Guide...
Page 6: ......
Page 26: ...26 Configuration Ultripower User Guide v4 0...
Page 36: ...36 Technical Specifications Ultripower User Guide v4 0...
