Ross SEA-8203A, User Manual

Page: 20 / 36

3-4
•
User Controls SEA-8203A User Manual (Iss. 01)
PWR (Power) LED
The PWR LED indicates the overall operating status of the SEA-8203A. This LED displays the
following conditions:
•
Green — The card is operating normally.
•
Flashing Green — The card requires a software upgrade.
•
Red — The card is not operational. Refer to the chapter, “ Service Information ” for
details on this condition.
OK/Error LED
The OK/ERROR LED indicates the status of the SDI input. This LED displays the following
conditions:
•
Green — A valid signal SDI input signal is present.
•
Red — The input signal is not present or not valid.
Rate LEDs
The RATE LEDs indicates the :
•
HD — The SEA-8203A is configured for HD signals.
•
SD — The SEA-8203A is configured for SD signals.
Button Controls
This section describes the SEA-8203A buttons and their functionality. Refer to Figure 7 for the
location of each button.
Bootload Button
This button is used for factory service in the unlikely event of a complete card failure. The Bootload
process is further described in the chapter, “
Service Information ” of this manual.