Ross OpenGear DSS-8224, User Manual

Page: 40 / 47

40 • DashBoard Menus DSS-8224 User Guide (v6.0)
Alarms Tab
Table 8.9 summarizes the Alarms options available in DashBoard for the DSS-8224.
Jumpers Tab
Table 8.10 summarizes the Jumpers options available in DashBoard for the DSS-8224.
Output 2 Auto Change
Over Mode Enabled, Primary
Source: Input 3
a
• ACO Mode is enabled
• BNC 1 is the source for Output 1
• BNC 2 is the source for Output 2
Enabled, Primary
Source: Input 4
a
• ACO Mode is enabled
• BNC 9 is the source for Output 1
• BNC 10 is the source for Output 2
Output 1 Source
(read-only) Input # Displays the secondary source for Output 1
Output 2 Source
(read-only) Input # Displays the secondary source for Output 2
a. This option is only available when JP10 is set to Input 1&2.
b. This option is only available when JP10 is set to Input 3&4.
Table 8.9 Alarms Menu Items
Item Parameters Description
Loss of Output # Ignore Signal Status field in the Signal tab will ignore loss of
input conditions
Notify* Signal Status field in the Signal tab reports loss of
input conditions when they occur
Loss of Reference Ignore Reference field in the Signal tab ignores loss of
reference
Notify* Reference field in the Signal tab reports when a loss of
reference occurs
Loss of Input # Ignore Corresponding Input field in the Signal tab ignores a
loss of the indicated input.
Notify* Corresponding Input field in the Signal tab reports
when a loss of the indicated input occurs
Table 8.10 Jumpers Menu Items
Item Parameters Description
Card Control Local Card control is performed on the card or with an
RCM-8120 remote control panel
Remote Card is remotely configured via DashBoard
Table 8.8 Remote Control Menu Items - Dual 2X1 Mode with Tracking Mode
Item Parameters Description