Ross OpenGear DSS-8224, User Manual

Page: 17 / 47

DSS-8224 User Guide (v6.0) Hardware Overview • 17
Status and Selection LEDs on the DSS-8224
The front-edge of the DSS-8224 has LED indicators for card power, and communication activity. Basic LED
displays and descriptions are provided in
Table 3.1 .
Table 3.1 LEDs on the DSS-8224
LED Color Display and Description
PWR Green When lit green, this LED indicates that the card is functioning correctly.
Flashing Green When flashing green, this LED indicates that the card does not have a
valid software load.
Amber When lit amber, this LED indicates a hardware failure.
Red When lit red, this LED indicates that the card is powering on.
Off When unlit, this LED indicates a lack of power to the card.
SW1 IN # Yellow The four LEDs present in this area report which input is selected for
Output 1. The LED for the selected input is illuminated yellow when
selected.
This input is routed to Outputs 1A and 1B.
Flashing Yellow When flashing, these LEDs indicate the ACO Mode is enabled.
SW2 IN # Yellow The four LEDs present in this area report which input is selected for
Output 2. The LED for the selected input is illuminated yellow when
selected. This input is routed to outputs 2A and 2B.
Flashing Yellow When flashing, these LEDs indicate the ACO Mode is enabled.
INPUT # Green When lit green, this LED indicates that an SDI signal is present on the
specified input.
Off When unlit, this LED indicates that no SDI signal is detected on the
specified input.
REF OK Green When lit green, this LED indicates than an analog reference is present
and locked.
Off When unlit, this LED indicates that the analog reference is not present,
or not locked.