Ross NK RCP-NKM, User Manual

Page: 49 / 56

RCP-NKM User Guide (v3.0) Operating the RCP-NKM • 5–7
• Press CHOP twice to toggle rapidly between the two sources (toggle cadence is 400 ms). The source label
on the screen toggles between the two sources. Fast chop is indicated by an upper-case C .
5. Do one of the following:
• If you are in slow chop, press CHOP twice to stop toggling between the two sources.
• If you are in fast chop, press CHOP once to stop toggling between the two sources.
The status of the key returns to CHOP .
Using a Menu
The key corresponding to the current menu is always illuminated.
To use a menu
1. Press the key that has the menu assigned to it.
A brief message is shown on the screen with the name of the menu. For example:
2.
Press the key that you want to use in that menu.
If the menu has been set up to fall back to another menu, the RCP-NKM goes to the pre-defined menu (see
“
Setting Up Menus ” on page 4–7).

If you need to return to the Home menu, but the RCP-NKM is not responding, use the DashBoard to do this. For
more information see “ Returning to the Home Menu ” on page 4–21.
De-Assigning a Machine Control Port
If you want to stop machine control on a particular port temporarily, you can park the port by de-assigning it.
To de-assign a machine control port
1. Press the key for the machine control port that you want to park.
2. Press DE-ASN .
To unpark the machine control port
• Make a machine control switch.