Ross NK RCP-NKM, User Manual

Page: 46 / 56

5–4 • Operating the RCP-NKM RCP-NKM User Guide (v3.0)
4.
If a TAKE key is assigned to the menu, press TAKE .
5.
If you want to protect the destination, press the protect key, if it has been assigned (see “ Protecting a
Destination ” on page 5–5).
Notes
Keep the following in mind:
• You may need to use a DST SH1 or DST SH2 key before the destination key.
• If you are in Cutbus mode, you cannot select a destination key.
• You may need to use a
SRC SH1 or SRC SH2 key before the source key.
• If you have selected the Breakaway Reset check box in the configuration document for the RCP-NKM, the
breakaway returns to the default breakaway after the switch is made.
Switching with a Crosspoint
To make a switch using a pre-defined crosspoint key
1. Press the crosspoint key.
If a TAKE key is assigned to the menu, the text on the screen that identifies the source key alternates between
Take ? and the selected source label. The crosspoint key flashes with the TAKE key.
2. If a TAKE key is assigned to the menu, press TAKE .
3. If you want to protect the switch, press the protect key, if it has been assigned (see “ Protecting a Destination ”
on page 5–5).
Notes
Keep the following in mind:
• When you make a crosspoint switch, the corresponding breakaway, destination, and source keys illuminate.
• If you have selected the
Breakaway Reset check box in the configuration document for the RCP-NKM, the
breakaway returns to the default breakaway after the switch is made.
Using a Macro
You can use macros on the RCP-NKM.
To use a macro
1. Create a macro (see “ Assigning a Macro to a Key ” on page 4–13).
2. Press the macro key.
If a TAKE key is assigned to the menu, the text on the screen that identifies the source key alternates between
Take ? and the selected source label for the last source key in the macro. The macro key flashes with the
TAKE key.
3. If a TAKE key is assigned to the menu, press TAKE .
Locking the RCP-NKM
You can lock the RCP-NKM if a panel lock or protect key has been assigned to the RCP-NKM.
The protect key must be held to lock the RCP-NKM.