Ross MB-652, User Manual, Page: 33 / 42

MB-652 User Manual (Iss. 04) DashBoard Menus • 4–3
Network Tab
Table 4.3 summarizes the Network configuration options available in the Network Connect
interface in DashBoard.
Connection
Management
Master Password ********
Indicates that a user-specified password is
set for the MB-652
Active Connections #
Number of external control devices, such
as DashBoard, connected via TCP to the
MB-652
Internal Bus
Status
Active Cards #
Reports on the sub-nodes in the Tree View
of the MB-652
Bus Load (%) #
Communication traffic of the internal
CAN Bus of the MB-652. A high value
indicates a high amount of traffic.
Table 4.3 Network Menu Items
Menu Title Item Parameters Description
Network
Device Name #
Assigns a unique identifier for your
MB-652. The Device Name is
automatically updated in the Product tab,
Tree View, and tab titles.
NTP Server ##.#.#.#
This is the IP Address of the NTP server
used as a time source
Current DIP Switch
(read-only)
User Settings This field is fixed.
Addressing Mode
Static
User defines the Network settings of the
MB-652
DHCP*
DashBoard obtains network settings
automatically for the MB-652
IP Address ##.#.#.###
Enables you to set the IP Address of the
MB-652 if the
Addressing Mode is set to
Static .
Subnet Mask ###.###.###.#
Enables you to set the Subnet Mask of the
MB-652 if the
Addressing Mode is set to
Static
Default Gateway ##.#.#.#
Enables you to set the Default Gateway of
the MB-652 if the
Addressing Mode is
set to Static
Apply
Applies and saves any changes made to
the
Network Settings
Cancel
Cancels any setting changes and resets the
Network Settings to the previous values
Table 4.2 Network Tab Items
Tab Title Item Parameters Description