Ross MB-652, User Manual, Page: 32 / 42

4–2 • DashBoard Menus MB-652 User Manual (Iss. 04)
Network Connect Interface
This section summarizes the tabs displayed in DashBoard for the Network Connect Interface.
Device Tab
Table 4.1 summarizes the read-only information displayed in the Device tab.
Network Tab
Table 4.2 summarizes the read-only information displayed in the Network status tab.
Table 4.1 Device Tab Items
Tab Title Item Parameters Description
Device
Device Name MB-652
MAC Address ##-##-##-##-##-## MAC Address for the MB-652
Software Rev #.##
Indicates the network connect software
version
Table 4.2 Network Tab Items
Tab Title Item Parameters Description
Current
Settings
Network Source
DHCP - set by user
The Addressing Mode is set to DHCP in
DashBoard.
The network automatically assigns the
MB-652 ethernet settings.
Static - set by user
The Addressing Mode is set to Static in
DashBoard.
User defines the ethernet settings from the
Network tab.
IP Address ##.#.###.### IP Address of the MB-652
Subnet Mask ###.###.#.# Subnet Mask for the MB-652
Default Gateway ##.#.#.# MB-652 gateway
NTP Server ##.#.#.#
IP Address of the NTP server used as a
time source
Connection
Management
Access Mode
Open
No access restrictions; the MB-652
accepts connections from all DashBoard
clients
Authenticated Only
Access control enabled; only DashBoard
clients version 4.0.0 or higher can
connect. The user must be authenticated
by the DashBoard Server and URM, or
must know the Master Password of the
MB-652.