Ross MB-652, User Manual, Page: 13 / 42

MB-652 User Manual (Iss. 04) Installation • 2–3
Front Panel Overview
This section briefly summarizes the features of the front panel.
Figure 2.1 MB-652 — Front Panel
1. Display Panel
This vacuum fluorescent display panel displays the audio meters and input signal information.
The following information is displayed:
• 16 bar graph VU/PPM meters
• a bar graph meter that reports LKFS ITU 1770-3/1771 loudness measurements
• a numerical readout of the LKFS and true peak measurement
• the input signal format
2. Volume Control
Turn the knob to control the volume. Push the knob to mute the audio.
3. Source Select Buttons
This row of eight push-buttons enable you to route the corresponding source to the speakers of
the MB-652. Refer to the section “
Channel Source Selection ” on page 3-9 for details.
4. Mode Select Buttons
This row of four push-buttons enable you to quickly specify the operating mode of the MB-652.
Refer to the section “
Mode Selection ” on page 3-9 for details.
5. Headset Jack
This is a long-frame 1/4” headset jack. When in use, the internal speakers of the MB-652 are
muted.
1) Display Panel 3) Source Select Buttons 5) Headset Jack
2) Volume Control 4) Mode Select Buttons
4
SDI IN MONITOR 1 2 3 4 5 6 7 8 L R SUM Lt/Rt
VOLUME
HEADSET
3
Monitoring Bridge | MB-652
1 2
5