Ross MB-650, User Manual

Page: 18 / 40

2–4 • Installation MB-650 User Manual (Iss. 01)
Rear Panel Overview
This section briefly summarizes the features of the rear panel.
Figure 2.2 MB-650 — Rear Panel
1. SDI IN BNC
This is the 3G/HD/SD SDI input signal.
2. SDI OUT BNC
This is a reclocked copy of the SDI input signal.
3. MONITOR Ports
These connectors provide analog audio. For a -20dBFS input, there will be a +4dBu output.
4. GPIO Port
This port is not implemented.
5. ETHERNET Port
The MB-650 includes an Ethernet port on the rear panel that is used for communication with
DashBoard and software upgrades via DashBoard.
6. Power Supply Connections
These are the connectors for the primary ( PSU1 ) and optional redundant ( PSU2 ) supplies.
7. Power Cord Bracket Inserts
Install the provided brackets to help retain the power cords to the MB-650 chassis.
For More Information on...
• power supplies for the MB-650, refer to the section “ Power Supplies ” on page 2-5.
• MB-650 power consumption, refer to the section “ Technical Specifications ” on
page 5-2.
1) SDI IN BNC 4) GPIO Port 7) Power Cord Bracket Inserts
2) SDI OUT BNC 5) ETHERNET Port
3) MONITOR Ports 6) Power Supply Connections
SDI OUT SDI IN MONITOR
2 3 4 5 6
7
1
ETHERNET
GPIO
PSU1 PSU2