Ross Master Control MC1-PANEL-16, User Manual, Page: 49 / 58

MC1-PANEL-16 User Guide (v4.0) DashBoard Menus • 49
Panel Name, Permission Tab
Table 8.4 lists the available options in the Panel Name, Permission tab.
Current DIP Switch
(read-only) Factory 2 •
SW1
is
DOWN
and
SW2
is
DOWN
• IP address is set to 10.1.2.10
• Subnet Mask is set to 255.255.255.0
Method Static User manually supplies the Ethernet settings. This is the
recommended setting.
DHCP* Automates the assignment of the Ethernet settings
IP Address ###.###.###.### The IP Address for the MC1-PANEL-16
Subnet Mask ###.###.###.### The subnet mask for the MC1-PANEL-16
Default Gateway ###.###.###.### The gateway for communication outside of the local
area network (LAN)
Apply Changes Applies and saves any changes made to the Ethernet 1
settings
Cancel Cancels any setting changes and resets the Ethernet 1
settings to the previous values
Table 8.4 Panel Name, Permissions Tab Items
Item Parameter Description
Panel Name’s Setting
Panel Name # Specifies the name displayed in DashBoard for this
MC1-PANEL-16
Configuration Lock
Edit Permission Unlocked* All menu items are unlocked and can be edited
Locked All menu items, except this one, are locked and
read-only. The MC1-PANEL-16 can still be controlled
by GPI and/or external device commands if these
features were enabled prior to locking.
Table 8.3 Ethernet Tab Items
Item Parameter Description