Ross Master Control MC1-PANEL-16, User Manual, Page: 42 / 58

42 • Operation MC1-PANEL-16 User Guide (v4.0)
Overview
MC1-PANEL-16 includes four high quality HD/SD-SDI video keyer. In addition to the external Key Video and
Key Alpha source, there are also four internal static/animation play-out channels. An excellent device for keying
external devices such as character generators, graphic systems and EAS devices into a program feed and/or keying
with four internal logo channels.
Figure 6.3 MC1-PANEL-16 — Keyer Controls
1. Program Keyer Select Buttons
When lit red, a button indicates that specific keyer is currently on-air on the Program bus. Selecting a button will
immediately perform cuts on that keyer.
2. Preset Keyer Select Buttons
These buttons are used to choose which keyer is included in the next transition. Note that depending on a
Personality tab setting, once a transition is performed, the button(s) are no longer lit.
For More Information on...
• configuring a key, refer to the MC1-MK Operation Guide .
• loading media files to logo channels, refer to the MC1-MK Operation Guide .
• changing the crosspoint naming and/or mapping, refer to the MC1-MK Installation Guide .
Audio
This section briefly summarizes the audio monitoring and controls available for the MC1-PANEL-16.
1) Program Keyer Select Buttons 2) Preset Keyer Select Buttons
AUTO
ON
EFF
SEL
KEY 1 KEY 2 KEY 3 KEY 4
AUDIO
OVER
KEY 1 KEY 2 KEY 3 KEY 4
SLOW MEDIUM FAST
AUDIO
OVER
BKGD
INCL
SQZ
INCL
TAKE FTB
SHIFT
SHIFT
PROGRAM
TRANSITION RATE TRANSITION TYPE
PRESET
PGM AO PROGRAM KEY SELECT
PRESET KEY SELECT PST AO
TRANSITION
CH3
Eff4 ONAIR GAIN: 0
KEY 1 KEY 2 KEY 3 KEY 4
AUDIO
OVER
PGM AO PROGRAM KEY SELECT
KEY 1 KEY 2 KEY 3 KEY 4
AUDIO
OVER
PRESET KEY SELECT PST AO
FTB