3–4 • User Controls
DAC-8418-A User Manual (Iss. 01)
Configuring the DIP Switches
This section provides a brief summary of the DIP Switches of the DAC-8418-A. Refer to
Figure
3.1
for the DIP Switch locations.
Figure 3.2
shows all the DIP Switches in the
OFF
position.
Figure 3.2 DIP Switches — OFF Position
Enabling Card-edge Control
Ensure that
SW1
is set to
ON
and
SW2
is set to
ON
if you are going to use the card-edge DIP
Switches to change settings on the card. You can still monitor the card status in DashBoard.
Setting the Output Modes
Use
SW5
and
SW6
in conjunction to set the output mode of the first audio converter.
Table 3.1
lists the combinations of DIP Switch settings for
SW5
and
SW6
.
Use
SW7
and
SW8
in conjunction to set the output mode of the second audio converter.
Table 3.2
lists the combinations of DIP Switch settings for
SW7
and
SW8
.
Setting the Nominal Output Level
Use
SW9
and
SW10
in conjunction to select the analog output level of the DAC-8418-A.
Table 3.3
lists the combinations of DIP Switch settings for
SW9
and
SW10
.
Table 3.1 Setting the Output Mode — Converter 1
SW5
SW6
Mode Selected
OFF
OFF
Stereo
OFF
ON
Mono
ON
OFF
Left Only
ON
ON
Right Only
Table 3.2 Setting the Output Mode — Converter 2
SW7
SW8
Mode Selected
OFF
OFF
Stereo
OFF
ON
Mono
ON
OFF
Left Only
ON
ON
Right Only
1
2
3
4
5
6
7
8
9
O N
10