DAC-8418-A User Manual (Iss. 01)
Installation • 2–5
Cabling for the DAC-8418-A
This section provides information for connecting cables to the installed Rear Modules on the
DFR-8300 series frames. Connect the input and output cables according to the following sections.
DFR-8310 Series Frame Cabling Overview
In the DFR-8310 series frames, the DAC-8418-A is used with the following Rear Module:
•
8310AR-036
Rear Module — Each module occupies one slot and accommodates one
card. This rear module provides two AES inputs, four AES outputs, and two stereo pair
outputs. (
Figure 2.1
)
Figure 2.1 Cable Connections for the 8310AR-036 and 8320AR-036 Rear Modules
DFR-8321 Series Frame Cabling Overview
In the DFR-8321 series frames, the DAC-8418-A is used with the following Rear Module:
•
8320AR-036
Full Rear Module — Each module occupies two slots and accommodates
one card. This rear module provides two AES inputs, four AES outputs, and two stereo
pair outputs. (
Figure 2.1
)
AES 2 In
ANLG Out 2-1
ANLG Out 2-2
AES 2 Out
AES 2 Out
ANLG Out 1-1
ANLG Out 1-2
AES 1 In
AES 1 Out
AES 1 Out
1 2
3 4
5 6
7 8
9 10