Ross ASI-310, User Manual

Page: 13 / 34

ASI-310 User Guide (v5.0) Hardware Overview • 13
Hardware Overview
This chapter presents information on the ASI-310 hardware components and features.
Overview
The ASI-310 is an openGear modular system composed of two sub-systems.
• a main PCB which connects to a rear module and the openGear frame midplane
• a rear module that provides physical connectors
Main PCB Overview
The main PCB is a typical openGear card. An ejector on one end secures the module to the slot inside the openGear
frame, and the other end inserts into a connector on the back of the rear module. This section provides a general
overview of the ASI-310 card-edge components.
Figure 1.1 ASI-310 — Reset Button
Reset Button (SW3)
This button is used for rebooting the card.
Control and Monitoring
This section summarizes the LEDs on the ASI-310 card-edge. Refer to Figure 1.2 for the location of the LEDs.
Reset Button