Ross ASI-310, User Manual

Page: 12 / 34

12 • Before You Begin ASI-310 User Guide (v5.0)
Functional Block Diagram
This section provides a functional block diagram that outlines the work-flow of the ASI-310.
Figure 1.1 Simplified Block Diagram — ASI-310
User Interfaces
The ASI-310 includes the following user interfaces:
DashBoard Control System
DashBoard enables you to monitor and control openGear frames and cards from a computer. DashBoard
communicates with other cards in the frame through the Network Controller Card. The DashBoard software and
manual are available for download from our website.
For More Information on...
• the ASI-310 menus in DashBoard, refer to the chapter “ Configuration ” on page 23.
• using DashBoard, refer to the DashBoard User Guide available from our website.
SNMP Monitoring and Control
The Network Controller Card in the openGear frame provides optional support for remote monitoring of your frame
and the using Simple Network Management Protocol (SNMP), which is compatible with many third-party
monitoring and control tools.
For More Information on...
• the SNMP controls on this card, refer to your ASI-310 Management Information Base (MIB) file.
• SNMP Monitoring and Control, refer to the
MFC-OG3-N and MFC-8322-S User Guide .
ASI IN
EQUALIZE/
DESERIALIZE
SERIALIZE
RE-STAMP
PCR
CONVERT
ASI-310
310 OUT
310 MON OUT
SERIALIZE ASI OUT MUX
TC/VCXO
PLL
310 IN
CONVERT
310-ASI
GPI/Os CPU