INSTALLATION
Installing a domestic appliance can be a complicated operation which if not carried out correctly, can seriously affect
consumer safety.
It is for this reason that a professionally qualified person should undertake the task who will carry it out in accordance with
the technical regulations in force.
In the event that this advice is ignored and the installation is carried out by an unqualified person, the manufacturer declines
all responsibility for any technical failure of the product whether or not it results in damage to goods or injury to individuals.
In case of installation of the cooker on a base, measures have to be taken to prevent the appliance slipping from the base
itself
>/>QIG>L@FFKLHE@F
This must be done in compliance with the regulations in force in the installation country. In all cases, on the gas feed pipe provide a
RSV[_V_riMTMZXf]UTSVZMVZMZXf]UTSVZMZXUXTRXMWXYP_XMdVZM[ZV[TQXMfTRgMQUqM]RXMYTUYXRiMZXf]UTSVZRMXQWRMTQWMdUXyP^UXMS]^XRiMZXf]UTSVZRM²PS`M
the official mark of the installation country.
Gas connection according to installation :
M pTS]ZTUMPfPWiMUXyP^UXM`VRXM²PS`MaX_`TQP_TUMdPSSPQfRMMjMmVdSMZ]^^XZMS]^XM
M ]STQXMPfPWiMUXyP^UXM`VRXM²PS`MaX_`TQP_TUMdPSSPQfRMMjMmVdSMZ]^^XZMS]^XM
M vZV[TQXMPfPWiMUXyP^UXM`VRXM²PS`MaX_`TQP_TUMdPSSPQfRMMjMmVdSMZ]^^XZMS]^XM
MjM[ZVYPWXWMS`XMdUXyP^UXM`VRXM_TQM^XMPQR[X_SXWMdVZMPSRMXQSPZXMUXQfS`g
MjM[ZVYPWXWMS`XMRVdSMZ]^^XZMS]^XM_TQM^XMPQR[X_SXWMdVZMPSRMXQSPZXMUXQfS`iMPSRMUXQfS`MWVXRMQVSMXy_XXWMgMaXSZXRMTQWMPSMPRMdPSSXWM²PS`MR]PST^UXM
clamps at the ends.
iMMjMRVdSMS]^XRMTQWMdUXyP^UXM`VRXRM²PS`MaX_`TQ_PTUMdPSSPQfRMa]RSM^XMTZZTQfXMSVM^XMT²TqMdZVaMTQqMdUTaXRiMTQWMQVSMWXSXZPVZTSXWM^qMS`XMM
combustion gases, hot cooker parts or by any spills of hot food.
/>HMBKK>L@FFKLHE@F>@?HE@FG>O
LM
RIGID PIPE CONNECTION
Connect directly to the manifold fittings.
LM
CONNECTION BY FLEXIBLE HOSE WITH MECHANICAL FITTINGS
We recommend this type of connection.
Screw the hose nuts directly onto the manifold fitting on the one hand and onto the stop cock of the piping on the other hand.
LM
CONNECTION BY SOFT RUBBER
We do not recommend this type of connection.
To be reserved solely for old installations not enabling any other option.
m_ZX²MS`XM_Va[UPTQSMXQWM[PX_XMM
Fit the soft tube to the end piece on
the one hand and to the regulator or
to the valve outlet on the other hand.
(2) In all cases, make sure the seal is fitted. Following the connection operations, test the leak tightness using soapy water, testing by
flame is strictly prohibited.
GAS MODEL
/>>Ujfrj>hi}kmnnhip>k{j>mnhmizjJ>k{j>kjz{ihzhmi>o|}k>O
- Check the compatibility between the Triple and the gas installation.
The Triple is factory set for use with the gas type as stated on the packaging and repeated on the rating plate afdPyXWMSVMS`XM_VVrXr.
M pTS]ZTUMfTRMMjMa^TZMzMMjMa^TZMwMaTPQMfTR
- If necessary, change the gas.
To adapt the gas burners cooker fit suitable jets that provide the nominal flow rate go to page 17.
`aavxaz}{{}zva}yta}tyzza§ }a~
The Triple is Class2 - Sub class 1 ; furniture adjacent to the unit must not be higher than the top of the appliance.
- The cooker has adjustable feet for perfect levelling on the floor.
- Make the gas connection to the installation according to the gas supply.
- Connect the cooker electrically in compliance with the information given on page 18.
- If the gas type has been changed, adjust the minimum flow of each gas burner on page 17.
- Connect the TZPVMSVMS`XM²TSXZMR][[UqMTQWMS`XM²TSXZMWZTPQTfXM[TfXMg
ANY MODIFICATION MADE TO THE GAS SETTING SHOULD BE NOTED ON THE RATING PLATE AFFIXED TO THE COOKER.
22 GB
