ROSIERES RTE 753 SF, Instruction Booklet

Page: 21 / 32

CLEANING
To keep your cooktop in good condition, it should be cleaned regularly after each use once it has cooled.
Attention:
Never remove the knobs from their seats.
Never use steam or high-pressure cleaners.
Enamelled parts
All enamelled parts must be washed only with a sponge and soapy water or using other non-abrasive
products made specifically for enamelled surfaces. After washing, dry thoroughly.
Stainless steel surface
The stainless steel surface should be cleaned with a damp cloth and specific products easily found on the
market.
After rinsing well, if possible, dry with a buckskin cloth.
Grates
The enamelled grates of the cooktop have been designed to be washed even in the dishwasher.
The stainless steel reducer may take on a bluish colouring in the burner area due to the temperature. This
effect may be attenuated using common stainless steel sponges available on the market.
Burners
The burners, composed of two pieces, can be removed and washed with suitable products. After cleaning,
they must be thoroughly dried and replaced precisely on their seats.
With regard to the electric ignition, check that the electrode E (fig.12) is always clean.
Clean the probe T (fig.12) so as to allow regular operation of the safety valve. Both the electrode and the
probe must be cleaned with caution. When finished, replace the burners precisely in their housing.
To prevent damage to the electric ignition, avoid using it when the burners are not in their seats.
MAINTENANCE
The appliances do not require particular maintenance, nevertheless it is recommended to
have them checked at least once every two years. If the knobs become difficult to turn or the
odour of gas is present, close the general tap and contact technical service.
The defective tap should be replaced together with the gasket.
CUSTOMER ASSISTENCE SERVICE
If you cannot identify the cause of the operating anomaly, switch off the appliance (do not
subject it to rought treatment) and contact the Assistance Service.
PRODUCT SERIAL NUMBER. Where can I find it?
PRODUCT SERIAL NUMBER. Where can i find it?
It is important you to inform the Assistance Service of your product code and its serial
number (a 16 character code which begins with the number 3); this can be found on the
guarantee certificate or on the data plate located on the appliance.
It will help to avoid wasted journerys to technicians, thereby (and most significantly) saving
the corresponding callout charges.
19