T600N - Wireless Dual Band Gigabit Router
88
CONFIGURATION GUIDE
Admin:
Change the router’s system password as well as setup a device to remotely
configure the settings.
•
Password Setting:
Here you can change the login password for T600N. (Default is:
Login: admin; pass: admin)
•
Old Password:
Enter the existing administrator password.
•
New Password:
Enter the new administrator password.
•
Repeat New Password:
Re-type the new administrator password.
•
Remote Management:
•
Host Address:
Enter the designated host IP Address.
•
Port:
Enter the port number (
Default: 8080
) for remote accessing
management web interface. (Unless behind a corporate firewall that
blocks some ports. Ports
80
and
443
are not typically blocked are for HTTP
and HTTPS outbound traffic.)
•
Enable:
Select to enable the Remote Management function.
Click
Apply
to save the settings or
Cancel
to discard the changes.
Tools – Admin
Note:
To access the settings of the T600N remotely, enter the router’s
WAN IP address and port number. E.g, if your external IP is 114.127.3.123
and you use port 8080, enter “
http://114.127.3.123:8080
” You will still need
to enter Login name and password to enter the router’s management page.