T600N - Wireless Dual Band Gigabit Router
73
CONFIGURATION GUIDE
IP Filter:
IP Filter is use to control the LAN computer’s internet access ability.
•
Enable IP Filtering Table:
Click to activate the IP Filter function
•
Deny all clients with IP address listed below to access the network:
Enable this will deny any device’s IP address listed here from connecting
to Internet.
•
Allow all clients with MAC address listed below to access the network:
Enable this will allow only the device’s MAC address listed here from
connecting to Internet.
•
Description:
Enter a description of the device that you want to record
to the MAC Filtering table.
•
Protocol:
You can select
Both
,
TCP
,
UDP
here. They are internet packet
transmit methods, TCP are mainly for protocol that requires more detail
such as Email, while UDP are protocols that require less checkup such
as multimedia streaming.
Click
Apply
to save the settings or
Cancel
to discard the changes.
Firewall – IP Filter – 1
Note:
Incorrectly changing these settings may cause the device to stop
function. Please make sure you know the effect before changing the settings
Click
Add
to save the settings to the table or
Reset
to discard the changes.