Seite - 47 -
04.10.2008 / LSV - JWh/ Rev. 02
DIGIDOS 24 AT
© 2008
OPERATION
Operation
3.3
Operation
3.3.1 Requirements for Foam Operation
- Commissioning the water pump
IMPORTANT!
The operating instructions of the pump manufacturer
absolutely must be heeded.
- Press „
FOAM
“ on the display.
- Check whether there is a sufficient supply of foam compound
in the foam compound tank (display).
- Use function key F1 to select the „
Direct-injection foam
proportioner
“.
- Use function keys F2 „
+%
“ and F3 „
-%
“ to select the
proportioning rate.
- Use function key F4 to select from where the foam compound
is to be drafted: „
TANK A
“, „
TANK B
“ or „
EXTERNAL
DRAFTING
“.
- Use the Enter key „
↵
↵↵
↵↵
“ to confirm the selection
- Open pressure outlets
- Set the pump pressure (pump operation) to the desired
value.
Foam
Direct-injection foam
proportioner
Enter
