Rosen Aviation 0602-001, Technical Manual

Page: 12 / 16

Rosen Aviation Blu-ray DVD Player
Document Number: 102900 Revision: F
Date: 10/29/10
Template: 4.2.3-6-FM; Revision A; 16 April, 2009 Page 12 of 16
◄◄ Press this control to fast-reverse the disc.
►I Press this control to skip to next chapter on a disc.
►► Press this control to fast-forward the disc.
Λ
, V ,
<
,
>
Press these controls to navigate up, down, left and right in menus.
ENTER When navigating through a menu, press ENTER to select menu options.
■
Press this control to stop the movie.
When pressed once, the ►II button can be used
to resume the movie from where it was stopped. (Some discs do not allow the resume
feature.) If the
■
button is pressed twice, then pressing the ►II button will start the
movie back at the beginning.
EJECT Press the eject button to eject a disc. Although it is not required, we recommend
that you remove the disc before powering off the player.
Note : The Blu-ray DVD player default setting is Auto Play.
3.1.2. LED Indicators
Power LED : The Power LED indicates the general status of the Blu-ray DVD Player.
The following table describes the Power LED operation. This LED will also blink when an
IR command is received.
Power Power LED
OFF OFF
ON - no disc WHITE
ON - Blu-ray disc loaded BLUE
ON - DVD loaded GREEN
ON - CD loaded AMBER
Booting up slow flashing WHITE
ERROR slow flashing RED
Component and Digital LED : The following table describes the Component LED and
Digital LED operation.
Resolution Component LED Digital LED
AUTO LIGHT BLUE LIGHT BLUE
480i/576i GREEN GREEN
480p/576p PINK PINK
720p AMBER AMBER
1080i WHITE WHITE
1080p24 VIOLET
1080p60 DARK BLUE