Rosemount 848T, Reference Manual

Page: 34 / 60

Reference Manual
00809-0100-4848, Rev AA
July 2009
Rosemount 848T Wireless
4-2
INSERT POWER
MODULE
At commissioning, the Power Module needs to be inserted. If present, remove
the plastic plug from the receptacle and insert the Power Module. Then close
the housing cover, making sure to tighten the cover so that metal touches
metal but do not over tighten.
NETWORK STATUS
If the Rosemount 848T Wireless was configured with the Network ID and Join
Key and sufficient time has taken place for network polling, the transmitter
should be connected to the network. To verify connectivity, open the Smart
Wireless Gateway’s integral web interface and navigate to the explorer page.
Figure 4-1. Smart Wireless
Gateway Explorer Page
This page displays the transmitter’s HART tag, PV, SV, TV, QV, and Update
Rate. If the device and sensors are working properly, a green status indicator
is present for HART status. A red indicator means there is a problem with
either the device, a sensor, or the communication path. If “Not Used” has
been selected for a sensor, a yellow indicator is shown. For more information
on a specific device, click on the tag name.
VERIFY OPERATION
Operation can be verified using one of three methods: 375 Field
Communicator, the Smart Wireless gateway’s integrated web interface, or
using AMS™ Wireless Configurator.
375 Field Communicator
For HART communication, an 848T Wireless DD is required. For connecting
with a 375 Field Communicator, refer to Figure 3-3 on page 3-3.
Function Key Sequence Menu Items
Communications 3, 3 Join Status, Communications Status, Join
Mode, Number of Advertisements Heard,
Number of Available Neighbors, Number of Join
Attempt