Reference Manual
00809-0100-4848, Rev AA
July 2009
Rosemount 848T Wireless
3-2
WIRELESS
CONSIDERATIONS
Power Up Sequence
The Power Module should not be installed on any wireless device until the
Smart Wireless Gateway (“Gateway”) is installed and functioning properly.
Wireless devices should also be powered up in order of proximity from the
Gateway, beginning with the closest. This will result in a simpler and faster
network installation. Enable Active Advertising on the Gateway to ensure that
new devices join the network faster. For more information, see the Smart
Wireless Gateway Manual (Document No. 00809-0200-4420).
Antenna Position
The antenna should be positioned vertically and it should be approximately 3
ft. (1 m) from any large structure, building, or conductive surface to allow for
clear communication to other devices.
Figure 3-1.
Conduit Plug
The temporary orange plugs should be replaced with the included conduit
plugs using approved thread sealant.
Figure 3-2.
Summary of Contents for 848T
