Rose electronics UCR-1R1X16U/2, Installation And Operation Manual

Page: 13 / 68

UNIT CONFIGURATION
ULTRACONSOLE REMOTE 2 INSTALLATION AND OPERATIONS MANUAL 7
Configuring the UltraConsole Remote 2 IP Input module

When you locally connect to the UltraConsole Remote 2 unit for the first time the Unit must be configured to
be compatible with your network.

Follow the recommended procedure below to configure all models

Make all cable connections to the KVM station and computers, connect to the network after the assigned unit
IP address has been entered and saved.

Make sure power is applied to all devices (Computer, UltraConsole Remote 2, and Monitor)

Make sure a computer is connected to CPU port #1 and that computer is powered on
If no computer is connected to port #1, the OSD menu screens may not sync

With power applied, a standard login screen will display on the KVM monitor

Login on to the unit using the default user ID, admin and no password

After a successful login, the remote computer’s video will display on the KVM monitor

Press the CTRL + ALT + C keys simultaneously to display the configuration menu options
as shown below:
Figure 2. Configuration Menu
Select “Unit Configuration” and the below screen will display
Figure 3. Unit Configuration Menu