background image

FCC/IC STATEMENTS, EU DECLARATION OF CONFORMITY 

 

CRYSTALVIEW INSTALLATION AND OPERATIONS MANUAL

 

31 

 

 

FEDERAL COMMUNICATIONS COMMISSION 

AND INDUSTRY CANADA 

RADIO-FREQUENCY INTERFERENCE STATEMENTS 

 

This equipment generates, uses and can radiate radio frequency 
energy and if not installed and used properly, that is in strict 
accordance with the manufacturer’s instructions may cause 
interference to radio communication.  It has been tested and found 
to comply with the limits for a Class B digital device in accordance 
with the specifications of Part 15 of FCC rules, which are designed 
to provide reasonable protection against such interference when the 
equipment is operated in a commercial environment.  Operation of 
this equipment in a residential area is likely to cause interference, in 
which case the user at his own expense will be required to take 
whatever measures may be necessary to correct the interference. 
Changes or modifications not expressly approved by the party 
responsible for compliance could void the user’s authority to operate 
the equipment. 
This digital apparatus does not exceed the Class A limits for radio 
noise emission from digital apparatus set out in the Radio 
Interference Regulation of Industry Canada. 
 
Le présent appareil numérique n’émet pas de bruits radioélectriques 
dépassant les limites applicables aux appareils numériques de la 
classe A prescrites dans le Règleme nt sur le brouillage 
radioélectrique publié par Industrie Canada. 
 
 
 

EUROPEAN UNION DECLARATION OF CONFORMITY 

ACCORDING TO COUNCIL DIRECTIVE 89/336EEC & 73/23EEC 

 

 
This equipment is in conformity with the 
protection requirements of the following 
Council Directives: 
The EMC Directive 89/336/EEC 
The Low Voltage Directive 73/23/EEC 
The Declaration of Conformity is based upon 
compliance of the product with the following 
harmonized standards: 
EN55022: 1994     EN61000-3-3: 1995      
EN55024: 1998     EN61000-3-2: 1995 
EN60950: 2000 

Summary of Contents for CrystalView





































Reviews: