SAFETY
CRYSTALVIEW INSTALLATION AND OPERATIONS MANUAL
25
Safety
The CrystalView KVM extender has been tested for conformance to
safety regulations and requirements, and has been certified for
international use. Like all electronic equipment, the CrystalView
should be used with care. To protect yourself from possible injury
and to minimize the risk of damage to the Unit, read and follow
these safety instructions.
n
Follow all instructions and warnings marked on this Unit.
n
Except where explained in this manual, do not attempt to
service this Unit yourself.
n
Do not use this Unit near water.
n
Assure that the placement of this Unit is on a stable surface or
rack mounted.
n
Provide proper ventilation and air circulation.
n
Keep power cord and connection cables clear of obstructions
that might cause damage to them.
n
Use only power cords, power adapter and connection cables
designed for this Unit.
n
Use only a grounded (three-wire) electrical outlet.
n
Use only the power adapter provided with the CrystalView.
n
Keep objects that might damage this Unit and liquids that may
spill, clear from this Unit. Liquids and foreign objects might
come in contact with voltage points that could create a risk of
fire or electrical shock.
n
Operate this Unit only when the cover is in place.
n
Do not use liquid or aerosol cleaners to clean this Unit. Always
unplug this Unit from its electrical outlet before cleaning.
n
Unplug this Unit from the electrical outlet and refer servicing to a
qualified service center if any of the following conditions occur:
§
The power cord or connection cables is damaged or frayed.
§
The Unit has been exposed to any liquids.
§
The Unit does not operate normally when all operating
instructions have been followed.
§
The Unit has been dropped or the case has been damaged.
§
The Unit exhibits a distinct change in performance,
indicating a need for service.
