Keyboard commands
Note: Use only the numeric keys above the keyboard to initiate the keyboard
commands from the remote unit.
Do not use the numeric keypad.
Command
Key Sequence
Command mode
– [L-Ctrl]
+ [L-Shift] + [F10]
Entering the command
mode sends the remote
units keyboard instructions
to the CrystalView Plus
instead of the connected
computer. In the
command mode, the
yellow LED on the remote
units RJ45 connector for
channel 1 will light
indicating that the unit is in
the command mode. The
keyboard status LEDs
(Num lock, Caps Lock,
and Scroll Lock) will flash
indicating which channel is
selected. The Command
mode automatically times
out after 30 seconds of
inactivity, saves all
settings, and returns the
keyboard to normal
functions
.
Command Mode
[L-Ctrl] + [L-Shift] + [F10]
Exit Command Mode and save
Exit Command Mode without saving
[ESC]
[L-Shift] + [ESC]
Select Channel 1, 2, 3, or 4
[1] / [2] / [3] / [4]
Select Channel 0
[0] (select all channels)
Reset EQ & Delay values
[L-Ctrl] + [Home]
Next Assisted EQ setting
[L-Ctrl] + [PgUp]
Previous Assisted EQ setting
[L-Ctrl] + [PgDn]
Increase RED delay
[R] + [R-arrow]
Decrease RED delay
[R] + [L-arrow]
Increase Green delay
[G] +[R-arrow]
Decrease Green delay
[G] + [L-arrow]
Increase Blue delay
[B] + [R-arrow]
Decrease Blue delay
[B] + [L-arrow]
Toggle RED delay
[L-Ctrl] + [R]
Toggle GREEN delay
[L-Ctrl] + [G]
Toggle BLUE delay
[L-Ctrl] + [B]
Reset EQ values
[L-Ctrl] + [End]
Increase LF EQ (Course)
[L] + [Up Arrow]
Decrease LF EQ (Course)
[L] + [Dn Arrow]
Increase LF EQ (Fine)
[L] + [R-Arrow]
Decrease LF EQ (Fine)
[L] + [L-Arrow]
Increase HF EQ (Course)
[H] + [Up Arrow]
Decrease HF EQ (Course)
[H] + [Dn Arrow]
Increase HF EQ (Fine)
[H] + [R-Arrow]
Decrease HF EQ (Fine)
[H] + [L-Arrow]
Reset keyboard and mouse
[F1]
Send NULL mouse byte
[F3]
Reset to factory defaults
[L-Ctrl] + [F9]
Toggle Unit Private Mode
[Scroll Lock]
Keyboard Commands
NOTE: All keyboard commands are initiated from the Remote unit.
Before any keyboard command can be issued, the unit must be in the
command mode and a channel selected. Refer to the installation and
operations manual for a complete description of all keyboard
commands and their usage.
Summary of Contents for CrystalView Plus
Page 1: ......
