The video from each connected computer can be adjusted using simple
keyboard commands shown in the keyboard command table.
Adjusting the video consists of:
1. Enter the Command Mode
2. Select the video channel to adjust
3. Display the test card at http://www.rose.com/htm/crvtestcard.htm or
create a straight line graphic that is equally divided into three color
parts, RED, GREEN, and BLUE
4. Adjust the RED, GREEN, and BLUE delay to align the three colors
5. Observe the “H” in the lower left corner of the test card or display some
text on a white background.
6. Adjust the LF and HF Equalization to eliminate smearing or bright
streaks
7. Save the settings
8. On the dual and quad models, select the next video channel to adjust
and perform steps 3 – 7 on this and all other channels.
Summary of Contents for CrystalView Plus
Page 1: ......