DMX Mode
16
PWM Frequency:
Pica Cubes™,
REV4 or Newer
, can be set to PWM at 4kHz or 16 kHz using RDM
or the user interface.
You can determine the PWM setting by watching the green
MODE
LEDs
during the boot sequence. If the green mode LEDs abruptly turn off after the
lamp test, your Pica Cube™ is set to 4kHz mode. If the green mode LEDs swoop
off from left to right, your Pica Cube™ is set to 16kHz mode.
To change your Pica Cubes™ PWM Frequency, ensure you are in
DMX
mode.
Then hold
TOGGLE
button until the status LED begins blinking rapidly. Then
rotate the
KNOB
to enter desired PWM Frequency:
16 kHz Frequency
F
►
TOGGLE
►
1
►
TOGGLE
►
6
►
TOGGLE
4 kHz Frequency
F
►
TOGGLE
►
0
►
TOGGLE
►
4
►
TOGGLE
Once you have selected your desired frequency press
MODE
to save and exit.
Summary of Contents for Pica Cube
