Rosco Pica Cube, User Manual

Page: 13 / 32

DMX Mode
13
RDM (Remote Device Management):
Pica Cubes™,
REV4 and newer
, have RDM (Remote Device Management)
functionality. RDM allows bidirectional control and communication over the DMX512
cable. See Below for RDM Command List:
G = GET S = SET
In DMX mode, the unit is controlled by the data it receives on
the RJ45 connectors located on the rear panel. The RJ45
located at the center of the back panel (DMX In) also
serves as a power input. The number of DMX channels
required to control the fixture is dependent on the factory
setting in use (for example - four color Cubes™ use four DMX
Channels while one color Cubes™ use one).
• DISC_UNIQUE_BRANCE
• DISC_MUTE
• DISC_UN_MUTE
• STATUS_MESSAGES
G
• STATUS_ID_DESCRIPTION G
• SUPPORTED_PARAMETERS
G
• DEVICE_INFO
G
• DEVICE_MODEL_DESCRIPTION
G
• MANUFACTURER_LABEL
G
• DEVICE_LABEL
G/S
• SOFTWARE_VERSION_LABEL
G
• DMX_PERSONALITY
G/S
• DMX_PERSONALITY_DESCRIPTION G
• DMX_START_ADDRESS
G/S
• SENSOR_DEFINITION
G
• SENSOR_VALUE
G
• OUTPUT_RESPONSE_TIME
G/S
• OUTPUT_RESPONSE_TIME_DESCRIPT
G
• MODULATION_FREQUENCY
G/S
• MODULATION_FREQUENCY_DESCRIPT
G
• DEVICE_HOURS G
• DEVICE_POWER_CYCLES
G
• IDENTIFY_DEVICE
G/S
• RESET_DEVICE
S