Automotive HD Video Recorder
Automotive HD Video Recorder
TROUBLESHOOTING
PROBLEM POSSIBLE CAUSE CORRECTIVE ACTION
Power
LED display is off
No chime heard
upon starting vehicle.
No power to recorder
Check the power cable
connections
LED
Display
RED LED lights are off
but beep sounds heard
upon starting vehicle.
System is in unknown
state or malfunction
Remove CYL-V Recorder from
the bracket and press “Reset”
button for few seconds and
check again or insert a brand
new or formatted blank SD card
and power up again to recover
Event
GREEN LED is constantly
blinking and constant
beeping
Constant Events and
chimes due to bumps
or potholes
Increase G-Sensor settings based
on your vehicle needs
Speed
Green LED is constantly
blinking and constant
beeping
Speed limit set too low
Increase Speed limit setting
through device configuration
based on your vehicle needs
GPS
GPS LED (Blue) remains
unlit while driving
GPS antenna is not
able to acquire satellite
signal due to weather
condition
Relocate CYL-V mounting base
to position on windshield with
line-of-sight to sky
SD card
Error
Constant beeps
SD error, no SD card,
not recording
video files
Reformat or replace SD card
Playback
Blurry video or no
video image
Camera/lens problem
Make sure Camera/lens is clean
and clear of obstructions and
not damaged
Playback No audio
Improper audio setting
in CYL-V Player (mute)
or configuration error
Configuration - set audio
recording check mark to “ON”.
Player – adjust volume control
slider as desired or unmute.
Check speaker settings on PC.
Playback Sluggish
Card Problem
Reformat MicroSD card
15
MICRO SD CARD
•
Your CYL-V recorder is provided with a MicroSD card.
•
The MicroSD card is pre-configured with factory default settings (see pages 9 -10).
If desired, configuration settings may be changed to accommodate a fleet’s specific
requirements.
•
Do Not Use MicroSD Card for any other purpose. Using the MicroSD Card for any
other purpose will cause damage or loss of video files on the card.
•
Maximum supported MicroSD Card is 64 GB.
Re-Formatting the MicroSD Card: Under normal use conditions, the MicroSD card should be
reformatted at least once per year. Under heavier (such as off-road or high shock) or more
frequent use, it is advisable to reformat the card more frequently. Additionally, smaller-capacity
MicroSD cards will need to be reformatted more frequently than larger-capacity cards.
Reformat the MicroSD card using “CYL-V_Settings.exe” software (see p. 9) to prevent MicroSD
card errors from occurring over an extended period. Note that upon reformatting the MicroSD
card, all existing operating and data files will be deleted. Be sure to perform a backup of any
important video files and configuration prior to reformatting. After reformatting, you may insert
the reformatted MicroSD card into CYL-V. The Recorder will automatically write the current
configuration file to the MicroSD card. New Data folders will be created on the reformatted
Micro SD Card and new Data files will be created as driving resumes.
CAUTION:
Not all MicroSD cards work with the CYL-V unit. Additionally, there are many off-
spec or counterfeit MicroSD cards sold on the internet. Rosco purchases original SD cards from
authorized distributors.
We recommend purchasing from Rosco. However, if you choose to purchase elsewhere,
consult Rosco or your authorized Reseller for MicroSD Card compatibility. The following is a list
of approved MicroSD Cards which may be purchased from Rosco. This list may be periodically
updated without notice.
ROSCO P/N
MEMORY SIZE
DESCRIPTION
DV352
16GB
High-Endurance MicroSD Class 10, Preloaded
DV349
64GB
High-Endurance MicroSD Class 10, Preloaded
14
