Galaxy Raid GHDX2-2430S-16U4D Installation and Hardware Reference Manual
C-2
D-SUB 9 and Audio Jack Pinouts
30 SI_O+ 64
SI_O-
31 SD8+
65
SD8-
32 SD9+
66
SD9-
33 SD10+ 67
SD10-
34 SD11+ 68
SD11-
Table C-1: SCSI Port Pinouts
C.2 D-SUB 9 and Audio Jack Pinouts
C.2.1
COM1 Serial Port Cable
COM1 Cable:
This cable connects between COM1 serial port on the
controller module to the serial port of a management computer. The serial
port’s defaults and requirements are:
1.
Set at 38400 baud, 8 bit, 1 stop bit, and no parity.
2.
In most cases, connecting RD, TD, and SG is enough to establish
communications with a terminal.
PN: GAL-9270ASCab
Figure C-1: Adapter Cable for COM1 - Connector Pinouts
CN1 Pin Number Pin Name
1 Ground
2 TXD
3 RXD
CN2 Pin Number Pin Name
1 NC
2 RXD
3 TXD
4 DTR
(Shorted)
5 GND
6 DSR
(Shorted)
7 RTS
(Shorted)
8 CTS
(Shorted)
9 NC
Table C-2: COM1 Adapter Cable CN1 and
CN2 Pin Out Definitions
