25
TF 200.02.0026_eng
5.
Functionality testing
After completing the installation and before use, all functions of the StandardLine washbasin must be
assessed. Subsequently, a functionality test must be conducted at least once a year by qualified personnel:
1. Check that the mounting instructions have been observed.
2. Check that all screws and bolts are fixed.
3. Check that all cables have been correctly connected, and that the plugs are pushed in properly.
4. Check that there is no load on the frame.
5. Check that there are no objects preventing the frame from moving freely within the height adjustment
range.
6. Press both switches on the control and hold the pressure as long as a loud beeping sound is heard.
When this sound stops, the frame can be moved to bottom position and is thus reset.
7. Press the DOWN button, move the frame to bottom position and check that the movement is even
and smooth. Make sure that the hose connections follow the movements of the frame, and that they
do not get squeezed.
8. Now press the UP button, move the frame to top position and check that the movement is even and
smooth. Make sure that the hose connections follow the movements of the frame, and that they do
not get squeezed.
If the above points are checked, the washbasin is ready to use. See the section
”Safety in use”
.
6.
Safety in use
➢
The StandardLine washbasin may only be used by persons who have read and understood these
instructions.
➢
The StandardLine washbasin is a height adjustable washbasin and may not be used as a lifting table
or as a person lifter.
➢
Always use the washbasin in a manner excluding the risk of damage to people or property. The
person operating the StandardLine washbasin is responsible for avoiding damage or injury.
➢
If the washbasin is used in publicly accessible locations, where especially children or other persons
with reduced observation capability may get near the StandardLine washbasin, the person operating
the washbasin must pay sufficient attention in order to prevent dangerous situations.
➢
Make sure that there is free space above and below the washbasin to allow free height adjustment.
➢
Be aware of water splashing from the washbasin during use, or actuation of the height adjustment. A
wet floor will result in a slipping hazard.
➢
Always check the water temperature before use. Too warm water may lead to scalding.
➢
If a handcontrol with flexible cord has been installed, be aware of the cord not getting caught on
anything. This could lead to a tripping hazard.
➢
Do not overload the washbasin and make sure that the load distribution is correct.
➢
Do not operate the washbasin in case of errors or damage.
➢
Do not use the washbasin in an explosive environment.
➢
Any modification to the StandardLine washbasin, which may influence its operation and construction,
is forbidden.
➢
Installation, service, and repairs may only be conducted by qualified personnel.
➢
Prior to use, ensure that the StandardLine washbasin has been mounted on a suitably strong wall
and that there are no loose connections.
➢
In case of inspections, service, or repairs, make sure that the washbasin is not loaded.
➢
If the StandardLine washbasin has not been installed in accordance with these mounting
instructions, the warranty may be void.
➢
Only use original Ropox spare parts as replacements parts. If other parts are used, the warranty may
be void.
