10
TF 200.02.0026_eng
4.
Mounting instruction
4.1
Installation interfaces
Construction
The wall must be made of a material suited for screw
mounting and approved for damp rooms. The hatched
area is the minimum area for reinforcement of the wall.
Tested in accordance DS/ISO 17966:2016 with the
following max. user weights:
40-14772: 200kg (440 lbs)
40-14773: 200kg (440 lbs)
40-14770: 200kg (440 lbs) (with porcelain wash basin)
Max. tensile load of upper screws
50kg/screw (110 lbs)
The washbasin is supplied with a set of screws and
rawlplugs suitable for mounting on a concrete wall. The
fitter should always consider the material, condition and
strength of the wall and use screws and rawlplugs
suitable for the specific wall type.
Plumbing
The drain is Ø32 (1 ¼”) and ends in an
Ø32x88.5° drain elbow.
The water supply ends in 2 (two) 90°
shut-
off valves with ½” outside thread
pointing upwards (not included). The
maximum protrusion of the shut-off
valves and drain connection should be
max 90mm (3 ½”) to allow for the
covers.
The optimum location and orientation is
as shown in green.
It is important that all hoses for water
connection and drain are flexible to
allow the frame to move freely within
the height-adjustment range of 700-
1000mm (27 1/2” – 39 2/5”) (including
washbasin).
For purchase of adapters for connection
to various standard installations, see
”
Connection Adapters
– Other
Washbasins
”.
Power
Recommended location of socket in wall for optimum and hidden wiring is shown in red. If a different location
is required, the cable from the control unit is 3200mm (126”).
