Ropex RESISTRON RES-5006, User Manual

Page: 16 / 62

Commissioning and operation
Page 16 RES-5006 Version 1
7.2.2 Configuration of the rotary coding switch for temperature range and alloy
The setting of the rotary coding switch for temperature range and alloy can be overwritten by the
parameter data (
 section 8.7 "Parameter data" on page 32).
When the switch position “9” is selected, additional temperature ranges and alloys can be set through the ROPEX
visualisation software (

section 8.12 "USB interface for visualisation software ROPEXvisual
®
" on page 47).
7.2.3 Configuration of the station address
On these two rotary coding switches, the station address of the RES-5006 can be set in the PROFIBUS network
from 1 to 99. Changes do not become effective until after switch-on.
With the switch setting 00, the station address with a class 2 master can be set over PROFIBUS with the SSA
service (set slave address). If no address has been assigned, the device has the standard address 126. The
address assigned through SSA remains stored in the device. As soon as a station address not equal to 00 is set
on the rotary coding switches and the 24 VDC power supply of the RES-5006 is switched off and back on again,
the stored address assigned through SSA is erased and the controller uses the set station address. In switch set-
ting 00, the standard address is then 126 again.
With the help of address setting via the rotary coding switch, it is possible to carry out a device change in an
existing machine without a programming tool. Only the same setting of the rotary coding switch can be made in
the replacement device.
Rotary encoder switch Station address
00 Changeable through SSA in the range 0…126
01…99 • Fixed address in the range 1…99
• Stored address is reset to 126
0
5
1
2
3
4
6
7
8
9
AU
X
CONF IG URATI ON
ALARM OU TP UT
ENE RG IZ ED
( ) A T AL AR M
- DE ENER GIZ ED
SW ITC H P OS.
1
0
4
5
8
9
TEM P. R AN GE
300°C
300°C
500°C
500°C
300°C
PC CO NFIG URA TIO N
780ppm /K
1 100p pm /K
(L)
(A2 0)
1 100p pm /K (A 20)
780ppm /K
3500ppm /K
(L)
0
5
1 2
3
4
6
7
8
9
Switch
position
0
1
4
5
8
300°C
300°C
500°C
500°C
300°C
1100ppm/K
780ppm/K
1100ppm/K
780ppm/K
3500ppm/K
e.g. Alloy-20
e.g. Alloy L
e.g. Alloy-20
e.g. Alloy L
Temp.
range
Temp.
coefficient
Band
alloy
0 = Factory settings
9 PC-CONFIGURATION
TEM P. C OEFFI CIE NT
!
0
0
0
0
5
5
5
5
1
1
1
1
2
2
2
2
3
3
3
3
4
4
4
4
6
6
6
6
7
7
7
7
8
8
8
8
9
9
9
9
PROFIBUS
STATION ADDRESS
x 1
x 10
Station address in PROFIBUS network between
0 and 99.
01 = Factory setting