Ropex CIRUS UPT-6011 Operating Instructions Manual Download Page 60 | Manualshive

Page: 60 / 79

background image

Device functions

Version 5

UPT-6011

Page 60

8.8.3

Parameters / Counters page

This page shows all parameter values received by the temperature controller from the EtherNet/IP

TM

scanner. If

the parameters have been changed using acyclic services, these changes are also indicated here.
For the meanings of the parameter data, refer to section 8.7 "Parameter object (class: 0x0F)" on page 31.
Under "Counters" you see a list of all cycle and operating hours counters, which are useful for statistical purposes.

8.8.4

Protocol page

You can download and display the device protocol for the temperature controller on this page. You see the overall
size of the protocol ("Total event entries") as well as the upload progress. All entries appear in the form of a table.
A timestamp (generated by the built-in clock), the operating hours and cycle counters, and the channel selected
at the time are shown for each entry.
In addition to errors, the protocol also contains entries of general interest such as "Clock set" or the "AUTOCAL"
function. An error code provides information on the cause of all events in the protocol. The error codes are
described in detail in section 8.19 "Error messages" on page 67. Each error code is explained in a tooltip when
you hover over it briefly.

«
...
58
59
60
61
62
...
»

Summary of Contents for CIRUS UPT-6011
















































































Reviews:

No comments

Related manuals for CIRUS UPT-6011

Brand: FAAC Pages: 64

Brand: Taie Pages: 66

Brand: 2iB Pages: 5

Brand: HANYOUNG NUX Pages: 74

Brand: HANYOUNG NUX Pages: 36

Brand: HANYOUNG NUX Pages: 2

Brand: HANYOUNG NUX Pages: 4

Brand: MADRIX Pages: 91

Brand: MADRIX Pages: 40

Brand: YASKAWA Pages: 18

Brand: DeLaval Pages: 102

Brand: Auber Pages: 3

Brand: BG Systems Pages: 24

Brand: Continental Instruments Pages: 2

Brand: KELCO Pages: 4

XMTN-800 Series

Brand: Yatai Pages: 5

Brand: Omron Pages: 25

DMC-14 5 Series

Brand: Galil Motion Control Pages: 200

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands