Page 18
Step 1: Panel Mounting
Sequence
1.
Remove connector on the bottom of the meter.
2.
Fit the meter into cutout[ANSI 4
”
or DIN96].
3.
Fix the meter onto the panel by turning the mounting nut. When conforming to the
DIN96 standard, there is no need to drill holes on the panel.
Fig 1.6 ANSI 4
”
Fig 1.7 DIN96
Note
The meter is mounted on switchgear boards (metal cabinet) in electrical facilities.
Summary of Contents for Accura 3300
Page 1: ...Energy Solution for Human Nature...
Page 6: ...Page 6 Standards Compliance Process Control Equipment E324900 KCC REM RTE ACCURA3300...
Page 17: ...Page 17 Meter Dimensions Fig 1 3 Front View Fig 1 4 Rear View Fig 1 5 Side View...
Page 23: ...Page 23 Fig 1 12 Three Phase 4 Wire Connection Using 3 PTs and 3 CTs Wiring Mode 3P4U...
