ROOTECH ACCURA 2350-DCM, Manual

Page: 26 / 40

Chapter 2 Accura 2350-DCM Operation/Setup Accura 2350-DCM User Guide
Page 26
ⓒ
2018 Rootech Inc. All Rights Reserved
LCD Screen
Operation Mode
Mode Description
Display
1
Displays the module ID and measured values in sequence
Event Alarm The screen automatically switches to the event alarm screen when an event occurs.
And then, the LCD screen and the Event LED blink. Long pressing the SET button
clears the event alarm, and the screen switch to the display screen.
Setup
1
Users can check or change items related to the module ID, events, and DO
operations.
1. If the DCM-50V module performs a stand-alone operation, the ID screen is unavailable.
Display
Accura 2350-DCM displays the module ID, measured voltage/current values, DO status, and temperature
data, and the screens appear in the following sequence. Short press the SET button on the display mode
to move to the setup mode.
ID
1
Volt/Curr/Power
2
DO Status Temperature
3
1. If the DCM-50V module performs a stand-alone operation, the ID screen is unavailable.
2. The Voltage/current/power screen is displayed for 8 seconds (10 seconds for a stand-alone operation), and other
screens are displayed for 2 seconds.
3. A temperature sensor is installed around a current sensor.
ID Display
If the DCM-50V module is in a stand-alone operation, the ID screen is unavailable.
ID Module ID
[d][d]
1
DCM module ID
2
1. d
→
decimal number
2. Module IDs are divided into as follows. The standby ID 255 is assigned to all Accura 2350 modules as a factory
default value.
Module ID ID Description
Communication ID ID 0 - 39 7
Conflict ID Redundant IDs There are more than 2 identical IDs. communication unavailable
Standby ID ID 255 Module ID for checking connection status, communication unavailable