Remove center molding by lifting up then pulling out
Unfold desk leg and look for hardware pack inside desk box.
Unfold corner supports
then push down
1/0/1900
Page
51
of
72
(from desk box hardware pack) in the pre-bore hole.
Place folding desk by sliding into the opening of loft chest
For desk on the right
remove third drawer, and secure desk with
one 3/4" screw (from desk box hardware pack) .
Secure each corner block with 1 1/4" screw
ASSEMBLY INSTRUCTIONS
STEP 10
STEP 12
STEP 11
STEP 13
STEP 14
C
C
F
F
STEP 15
