ASSEMBLY INSTRUCTIONS
Remove center molding by lifting up then pulling out
Unfold desk leg and look for hardware pack inside desk box.
Unfold corner supports.
(from desk box hardware pack) in the pre-bore hole.
Place folding desk by sliding into the opening of loft chest
For desk on the right
remove third drawer, and secure desk with
Secure each corner block with 1 1/4" screw
then push down.
one 3/4" screw (from desk box hardware pack) .
1/0/1900
Page 29 of
72
STEP 12
STEP 14
STEP 13
STEP 15
STEP 16
C
C
H
H
STEP 17
